Precautions for opening of water tank opening size

2022-07-22
  • Detail

In our home decoration, the opening of the sink is one of the steps that need to be paid attention to. We need to understand the size of the opening of the sink and its precautions, so that we can decorate the perfect sink. Today, I'll take a look at the opening size of the sink and the precautions for opening, for your reference

in our home decoration, the opening of the sink is one of the steps that need to be paid attention to. We need to understand the size of the opening of the sink and its precautions, so that we can decorate a perfect sink. Today, I'll take a look at the opening size of the sink and the precautions for opening, for your reference

precautions for water tank opening

1. Confirm the water tank and its excavation size (including the radian of the four corners of the water tank hole)

2. According to the drawing, determine the center position of the sink, use the template to locate or draw the opening line according to the hole size

3. First round the hole with a hole opener at the four corners of the hole, and then use a gong machine to drill along the hole line

4. Mill the hole edge to the corresponding edge shape according to the drawing

5. Evenly apply glass glue on the lower edge of the water tank hole, align the water tank with the opened water tank hole, stick the reinforcement block, and use strong AB glue for reinforcement, and then apply sealant after the glue is cured

6. When milling the edge shape of the sink hole and installing the sink, it is necessary to distinguish the front and back of the table

7. If the sink is used as a basin on the table, the table panel does not need to be treated in the factory processing process

8. If the basin on the stage is installed on site, draw the opening line according to the opening template of the water tank. First round the hole with a hole opener at the four corners of the hole position, and then use a gong machine to open the hole along the opening line

9. Evenly apply glass glue under the edge of the water tank, align it with the opened water tank hole and install it, clean up the excess glass glue, and wait for the glue to solidify

the opening size of the sink

the opening size of the sink is actually determined according to the needs, but it is generally based on the size of the sink we choose. Generally, the opening size of the sink is 430-480mm, except for some specially customized ones

the relevant information about the opening size of the water tank is introduced here. I hope this article is helpful to you. If there is anything else you don't understand, you can leave a message to Xiaobian below, and we will answer it for you as soon as possible

合肥牛皮癣医院

合肥精神医院

哈尔滨心血管医院

Copyright © 2011 JIN SHI